There is a switch that we engaged called "Lock Stagebox" however I believe that's only for the preamp remotes, and doesn't lock the knobs on the S16's front Panel" Very odd, and obviously not behaving as expected. Let me repeat…the settings are set, and it doesn't work…then they are changed and changed back to the SAME setting it was and then they worked. We did this a few times, and all of a sudden the P16s popped in correctly. So then, we began a process of power cycling the snakes, and changing the settings, and changing them back to the correct setting. Everything is set correctly, yet it's still not working correctly. We tripled checked the board assignments / settings for them, and verified the snake's settings. On his advice, I did do a factory reset, loaded the scene back in, and that cured the channel mirroring issue, but the P16s were still wrong. Thanks again for that, though, because at least now we have some confirmations. Not surprised, as sometimes the info you find online has since been changed, etc. The email you forwarded from Jeff at Behringer was helpful in confirming several things that we suspected were the case, but in some cases given info to the contrary from manuals, videos, and the like. " When they work, they work flawlessly, but they seem very temperamental…if settings get changed, they start behaving erratically, and get "stuck". The solution thus far is to keep changing the setting and changing them back a bunch of times until everything seems to "pop" back in and the correct channels correspond to the P16 units again.VERY VERY weird intermittent issues here that can shut a show down INSTANTLY! When it works, it works flawlessly but when it doesn't, it's horrifying.Here's the description my partner wrote of the whole issue. P16's are plugged into the back of the snakes. Basically the settings change, sometimes one mirrors the others on some channels and they don't match up to the P16 settings on stage. The system is an X32 with two, S16 snakes on stage.
I have no idea what to do to fix this.The club I'm running sound in has been having ghost issues with what we think after lots of hunting, are the S16 Snakes. If I then unplug the X32 usb connection from the laptop and choose the laptops internal soundcard in Ableton, the midi out from Ableton to my hardware corrects itself. I have tried both of my midi interfaces, each time the midi interface was directly connected to the laptop (no usb hubs) with no luck. In troubleshooting, I have unplugged everything from the laptop except the x32 via usb (no hub) and a usb midi interface with one midi out directly to a drum machine. I have turned off all midi communication from/to the X32 in its preferences and as a precaution redirected it from usb to the midi in/outs which aren't connected. The X32 hooked up via usb as an audio interface causes unstable/jittery outgoing midi from Ableton to my hardware synths/drum machines/sequencers.
I have spent the last few days trying to incorporate a Behringer X32 audio interface/mixer into my midi based studio and have found a serious issue. I am looking for anyone who has used a Behringer X32 as an audio interface while Ableton midi sequences outboard gear.
BEHRINGER X32 TROUBLESHOOTING DRIVER
i just tested on my macbook pro and it must be caused by the windows X-USB Driver for the X32.
BEHRINGER X32 TROUBLESHOOTING WINDOWS 10
*edit: my main laptop is a windows 10 machine.
0 kommentar(er)
